Installation Area (Min.): 750 m²
Dimensions (L×W×H): 30 × 25 × 15.9 m
Required Operating Power: 294 kW
Cold Bin Capacity: 4 × 7.5 m³ (Total 30 m³)
Diameter × Length: 1.8 m × 7.7 m
Drying Capacity (5% water content): 130 t/h
Fuel Options: Diesel, Heavy Oil, Natural Gas (Optional)
Method: Gravity Filter + Bag Filter
Bag Filter Area: 480 m²
Emission Dust Content: ≤ 30 mg/Nm³
Soot Emission: ≤ 1
Screening Layers: 4 Layers
Screening Area: 13.5 m²
Mixing Power: 2 × 22 kW
Mixing Method: Double Horizontal Shaft with Opposite Blade Distribution
Bitumen & Filler Feeding: Inclined Gravity Flow
Thermal Oil Heater: 200,000 kcal/h
Bitumen Tank: 1 × 40,000 L
New Filler Tank: 1 × 20 m³
Type: PLC + PC, Full Computer Control System
Indoor Noise of Control Cabin: ≤ 70 dB
Under Mixer Capacity: 12 m³
The XAP125 features an advanced asphalt secondary weighing system and high-accuracy oil-stone ratio control. This ensures that every batch meets strict quality standards, reducing material waste and improving pavement durability.
Equipped with a high-efficiency dust collector (gravity + bag filter) and intelligent fly ash compensation, this plant operates well below environmental limits. With emissions capped at 30 mg/Nm³ and soot levels ≤1, it is ready for strictest regional regulations.
The intelligent fault diagnosis system minimizes downtime by quickly identifying issues. Combined with efficient heat transfer and intelligent combustion technology, the XAP125 significantly lowers fuel consumption compared to conventional plants.
To ensure fast and secure delivery, the XAP125 is shipped in standard export modules:
Shipping Specification: 17.5M Plate Trailer / 40 Feet Container
Shipping Units: 8 Units (Trailer) / 12 Units (Container)
Flexible shipping options allow for cost-effective logistics whether you are located near a seaport or inland.
✅ High Output: 120 t/h standard productivity meets large-scale project demands.
✅ Reliable Performance: Built with XCMG's proven durability for continuous operation.
✅ Flexibility: Compatible with diesel, heavy oil, or natural gas.
✅ Low Maintenance: Modular design simplifies access to key components.
✅ Global Compliance: Meets international emission standards.
Ready to upgrade your asphalt production capacity? Our team of experts is available to provide site planning assistance, installation support, and after-sales service.
Contact us today to discuss your specific project requirements or request a tailored shipping quote.
Q: What is the minimum area required to install this plant?
A: The minimum installation area is 750 m². However, we recommend an additional space for material stockpiling and vehicle movement.
Q: Can this plant run on natural gas?
A: Yes. While the standard configuration supports diesel and heavy oil, a natural gas burner is available as an optional upgrade.
Q: Does the control system support remote monitoring?
A: The PLC+PC full computer control system is compatible with remote diagnostics and monitoring modules upon request.